Rad Inlet Hose
$77.77
Available to Order
Interchangeable With 23794 (2)
Technical Specifications
23794
2 lb 2 oz
2016-09 International/Navistar, DuraStar 4300, International/Navistar MaxxForce DT Diesel, Upper
29.6
752
Yes
2.25
57
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Driven By Possibility
No
0
Coolant Hose
Molded Coolant Hose
Hose
| Manufacturer | Part Numbers | Superseded Parts |
|---|---|---|
| AC DELCO | 27064X | |
| CAR QUEST | 23794 | |
| CONTINENTAL-VEYANCE | 67171 | |
| I H C TRUCK | 3610318C2 | 0318C1, 3610318C1 |
| IHC / NAVISTAR | 3610318C2 | 0318C1, 3610318C1 |
| NAPA | NBH16478 | |
| OTHER | 3610318C2 | 0318C1, 3610318C1 |
Vehicle Fitment
| Make | Model | Years |
|---|---|---|
| ENGINE | NAVISTAR - MAXXFORCE DT | * |
| IC CORPORATION | CE INTEGRATED | 2009 |
| IC CORPORATION | CE SCHOOL BUS | 2010-2015 |
| IC CORPORATION | HC INTEGRATED COMMERCIAL | 2010-2012 |
| INTERNATIONAL | 4300 | 2007, 2009-2011, 2013-2016 |
| INTERNATIONAL | 4300LP | 2009-2011, 2013-2016 |
| INTERNATIONAL | 4400 | 2010-2012, 2014-2015 |
| INTERNATIONAL | 4400LP | 2010-2012, 2014-2015 |
| INTERNATIONAL | 7400 | 2011-2012 |
This list of compatible vehicles and years is accurate, but it may not be complete. There may be additional vehicle applications and years compatible with this part not listed.